MaxxiLine Small Helium Tanks Frequetly Asked Questions
What is the water capacity of MaxxiLine disposable Helium Tanks?
MaxxiLine Helium Tanks bottles are supplied in four sizes : 1 Litre (Up to 110 Litre of Gas Compressed - 0,11m3) - 1.2 Litre (Up to 120 Litre of Gas Compressed - 0,12m3) - 1.8 Litre (Up to 160 Litre of Gas Compressed - 0,16m3) - 2.2 Litre (Up to 220 Litre of Gas Compressed - 0,22m3). This number refers to the internal volume of the gas bottle when is empty ( often referred to as water volume ).
Have you the ability to provide the gas bottles branded with our own label artwork?
Yes of course. You provide us a custom label to our specifications (you can simply design this yourself or have a graphic designer make it for you). Upon request, MaxxiLine can also design your custom label on your behalf. We accept custom labels in High Resolution format. Specs for your label design will be provided to you. The label design is open to your discretion, as long as space is available . After you have approved the custom label, MaxxiLine will begin production of your labels and gas bottles.
Where I can find the Certification Sheets of your products?
MaxxiLine Disposable Helium Tanks are manufactured in Italy and in accordance to the current stringent quality and safety standards. MaxxiLine helium disposable tanks are individually manufactured, certified and tested in according to UNI EN ISO 11118 (EX EN 12205 TPED). Please Contact Us for additional information
Are there minimun order sizes?
Pricing will vary based on the size of the order. The minimum order quantity is 1 pallet. We can accommodate orders of any size. Please Contact Us for additional information
How to fill Balloons from MaxxiLine helium bottle?
The Push-To-Fill Helium Balloon Filler Nozzle allows you to fill Latex and Foil balloon balloons in seconds and don't need to waste you fun time. It's so easy that it almost appears magical.
Filling Instruction Guide:
Unscrew the protective cap from the cylinder valve.
Screw the filling nozzle gently into the cylinder valve by hand up to abutting against the valve.
Place the balloon neck over the filling nozzle making sure there is a snug fit so no helium can escape.
Hold the balloon neck firmly on the filling nozzle and gently press the lever down to release the helium. Release the lever on the nozzle to stop inflation and remove the balloon, pinching the neck closed so no helium can escape.
When you have finished inflating balloons, unscrew the filling nozzle from the cylinder valve and screw again the protective cap.
After inflating latex balloons, pinch balloon tightly at base of balloon neck and remove from nozzle. For foil balloons, simply remove from nozzle after inflation, as foil balloons are self-sealing.
To assure maximum float time, tie a tight knot in the neck of the latex balloon. Foil balloons do not require a knot.
Attach ribbon of desired length below the knot on latex balloons or the lower neck area of foil balloons.
How do I work safely with Compresses gases ?
Keep out of the reach of children.
Do not place the plastic inflator in mouth or nose for any reason.
Do not inhale any gas.
Do not refill with any material.
Do not store in damp areas.
Store in a well ventilated place.
Contains gas under pressure; may explode if heated.
Never expose the cylinder to direct heat or fire.
Do not mistreat the tank by dropping on sharp or pointed surfaces.
Where can I find the MSDS for your products?
The MSDS is designed to provide workers and emercency personnel with the proper procedures for handling or working with our products. The sheets describe howthe products should be stored and disposed of. First aid procedures, transportation requirements and other precautonary information are also addressed. These MSDS are not applicable to consumer use of our products. We thoroughly evaluate the safety aspects of all of our consumer product prior to their use in the home and provide all necessary, appropriate and applicable safety information on product labels. Please Contact Us for additional information
How to recycle / dispose the cylinders?
MaxxiLine Helium Tanks are fully recyclables . So it's easy to dispose the cylinders when are empty. Check with your community to see if you can recycle the tank through your curbside recycling program. Alternately, take the empty tank to a steel recycling facility near you. These are the easiest ways to recycle the tank, but check first before using either option.
